CABLE
3200 Penetrating
Cable Wire Rope Lubricant |
 |
Used
on conventional hoist and friction ropes,
drum hoist ropes, crane and drive
Corrosion protection right to the CORE of the wire rope! |
|
Features and Benefits:
Features:
- Not controlled under WHMIS
- Non regulated
- Multipurpose product
- No hazardous Ingredients
- UNIQUE dual anti-rust additive system
- Flash point over 260/ c
- User friendly
- Forms a thin film on the rope
- Non toxic
- Economical
- Excellent penetration and wetting ability
- Excellent adhesion, fortified with tactifiers to provide
adhesion of the Lubricant to wire ropes
Benefits:
- ropes and wire rope slings
- Reduces fling off
- Improved cleanliness in hoist area, greaterenvironmental friendliness
- Provides E.P. and corrosion protection from the CROWN to the CORE of the ROPE
- Provides long lasting staying power
- Extends rope life in severe service applications
- Reduces lubrication intervals
- Provides Extra Rust Protection under corrosive shaft conditions
- Long-term lubrication, reduced product requirements
CABLE
3200 Typical Properties:
|
APPEARANCE
|
VISUAL
|
LIGHT RED
|
|
Viscosity,
cSt @ 40/c
|
ASTM
D-445 |
32 |
|
Viscosity,
cSt @100/c
|
ASTM
D-445 |
5.8 |
|
Viscosity
Index
|
ASTM
D-2270 |
124 |
|
Pour
Point, 0/c
|
ASTM
D-97 |
-27 |
|
Copper
Strip Corrosion @ 100/c,3 Hrs.
|
ASTM
D-130 |
1A |
|
Rust
Test
|
ASTM
D-665 |
|
|
A
(Distilled Water @ 24 Hrs.)
|
ASTM
D-665A |
PASS |
|
A
(Distilled Water @ 48 Hrs.)
|
ASTM
D-665A |
PASS |
|
B
(Syn. Sea Water @ 24 Hrs.)
|
ASTM
D-665B |
PASS |
|
B
(Syn. Sea Water @ 48 Hrs.)
|
ASTM
D-665B |
PASS |
|
Timken
OK Load lbs.
|
ASTM
D-2509 |
|
|
4-Ball
Wear Test, Scar dia,(mm)
|
ASTM
D-2783 |
0.47 |
|
|
Back
to Other Products |
